FUEL TANK
FUEL INJECTION (FUEL SYSTEMS)
8) Tighten the band mounting bolts.
Tightening torque:
33 N.m (3.4 kgf-m, 25 ft-lb)
9) Install the rear crossmember. <Ref. to RS-19,
INSTALLATION, Rear Crossmember.>
10) Connect the connectors to the fuel tank cord
and plug the service hole with gromment.
EN0537
11) Set the rear seat and floor mat.
12) Connect the connector to the fuel pump relay.
2
EN0344
C: INSPECTION
1) Make sure there are no cracks, holes, or other
damage on the fuel tank.
2) Make sure that the fuel hoses and fuel pipes are
not cracked and that connections are tight.
FU(S0HC)-53