Subaru IMPREZA 2002 Service Manual page 309

GENERAL DESCRIPTION
STARTING/CHARGING SYSTEMS
2. GENERATOR
\ .
I
(9) Brush
(1 1 )
Rear cover
(1)
Pulley
(5)
Rotor
(2) Front cover
(6) Bearing (1 0) Rectifier
(3) Ball bearing
(7)
Stator coil
(8) IC regulator with brush (1 2) Terminal
(4) Bearing retainer
" 1
\ \
i 7
\
H6M0493(
C: CAUTION
tive goggles, and protective shoes during opera-
tion.
Remove contamination including dirt and corro-
sion before removal, installation or disassembly.
tect them from dust or dirt.
Before removal, installation or disassembly, be
Be careful not to burn your hands, because each
Be sure to tighten fasteners including bolts and
nuts to the specified torque.
Place shop jacks or safety stands at the specified
points.
sensors or units, be sure to disconnect the negative
terminal from battery.
Wear working clothing, including a cap, protec-
part in the vehicle is hot after running.
Keep the disassembled parts in order and pro-
Before disconnecting electrical Connectors
Of
sure to clarify the failure, Avoid unnecessary re-
moval, installation, disassembly, and replacement.
sc-5