Subaru IMPREZA 2002 Service Manual page 160

CYLINDER HEAD ASSEMBLY
MECHANICAL
6) Install the intake manifold. <Ref. to FU(S0HC)-
17, INSTALLATION, Intake Manifold.>
7) Install the camshaft sprocket. <Ref. to ME(S0-
HC)-52, INSTALLATION, Camshaft Sprocket.>
8) Install the timing belt assembly. <Ref. to ME(S0-
HC)-48, INSTALLATION, Timing Belt Assembly.>
9) Install the belt cover. <Ref. to ME(S0HC)-46, IN-
STALLATION, Belt Cover.>
10) Install the crankshaft pulley. <Ref. to ME(S0-
HC) -45, I N STALLAT I ON, Cranks haft P u I I ey
.
>
11) Install the V-belt. <Ref. to ME(S0HC)-43, IN-
STALLATION, V- belt. >
C: DISASSEMBLY
1) Place the cylinder head on ST.
ST 498267800 CYLINDER HEAD TABLE
2) Set the ST on valve spring. Compress the valve
spring and remove the valve spring retainer key.
Remove each valve and valve spring.
ST 499718000 VALVE SPRING REMOVER
CAUTION:
Mark each valve to prevent confusion.
Use extreme care not to damage the lips of
the intake valve oil seals and exhaust valve oil
seals.
M E(S0HC)-62