Subaru IMPREZA 2002 Service Manual page 25

INTAKE MANIFOLD
FUEL
INJECTION
(FUEL SYSTEMS)
23) Remove the fuel injector pipe.
H2M2975
~
24) Remove the bolt which installs the fuel pipes on
the intake manifold.
B2M349 1
25) Remove the fuel pipe assembly and pressure
regulator, from the intake manifold.
D: ASSEMBLY
1) Install the fuel pipe assembly and pressure reg-
ulator, etc. to the intake manifold.
2) Tighten the bolt which installs the fuel pipes on
the intake manifold.
Tightening torque:
4.9 N-m (0.5 kgf-m, 3.6 ff-lb)
B2M3491
3) Connect the right side fuel hose to the injector
pipe, and tighten the clamp screw.
B2M4274
4) Install the fuel injector pipe.
H2M297E
5 ) Connect the left side fuel hose to the injector
pipe, and tighten the clamp screw.
~
6) Connect the air assist hoses.
I
RH side
LH side
B2M4149A
FU( SO HC)-23