DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)
ENGINE (DIAGNOSTICS)
Check
Is the canister damaged or is
there a hole of more than 0.5
mm
(0.020 in) dia. in it?
Is the fuel tank damaged or is
there a hole of more than 0.5
mm (0.020 in) dia. in it?
Are there holes of more than
0.5 mm (0.020 in) dia., cracks,
clogging or disconnections of
hoses or pipes in evaporative
emission control system?
Step
8
CHECK CANISTER.
9
CHECK FUEL TANK.
Remove the fuel tank. <Ref. to FU(S0HC)-51,
Fuel Tank.>
10
CHECK ANY OTHER MECHANICAL TROU-
BLE IN EVAPORATIVE EMISSION CON-
TROL SYSTEM.
Yes
No
Repair or replace
the canister. <Ref.
Canister.>
Repair or replace
the fuel tank. <Ref.
Fuel Tank.>
Repair or replace
the hoses or pipes. (distributor) ser-
Go to step 9.
to EC(S0HC)-5,
Go to step 10.
to FU(SOHC)-51,
Contact with SOA
vice.
NOTE:
Inspection by DTh
is
required, be
cause
probabk
cause is deteriora
tion
of
multiplt
parts.
EN(S0HC)-216