DIAGNOSTIC PROCEDURE WITH DIAGNOSTIC TROUBLE CODE (DTC)
ENGINE (DIAGNOSTICS)
Check
Does the starter motor operate
when ignition switch is turned
to "ON"?
Step
1
CHECK OPERATION OF STARTER MOTOR.
NOTE:
Place the inhibitor switch in each position. (AT
model)
Depress or release the clutch pedal. (MT
model)
Yes
Repair battery
short circuit in
starter motor cir-
cuit. After repair,
replace the ECM.
<Ref. to
Engine Control
Module.>
FU(S0HC)-47,
No
Check starter
motor circuit.
<Ref. to
STARTER
CUIT, Diagnostics
for Engine Start-
ing Failure.>
EN(SOHC)-58,
MOTOR CIR-
EN(S0HC)-247