Subaru IMPREZA 2002 Service Manual page 231

ENGINE COOLANT
COOLING
4. Engine Coolant 3) Warm-up engine completely for more than five
minutes at 2.000 to 3,000 rpm.
A: REPLACEMENT
4) If the engine coolant level drops in radiator, add
the engine coolant to filler neck position.
1. DRAINING OF ENGINE COOLANT
5) If the engine coolant level drops from upper level
1) Lift-up the vehicle.
of reservoir tank, add the engine coolant to the up-
per level.
2) Remove the under cover.
3) Remove the drain cock to drain engine coolant 6) Attach the radiator cap and f - e w ~ o i r tank cap
into container. properly.
NOTE:
Remove the radiator cap so that engine coolant will
drain faster.
2.
FILLING OF ENGINE COOLANT
1) Fill engine coolant into radiator up to the
neck position.
Coolant capacity (fill up to "FULL" level):
Non-turbo AT model
Non-turbo MT model
Turbo AT model
Turbo MT model
Approx. 6.9
8 (7.29 US qt, 6.07 Imp qt)
Approx. 7
8
(7.4 US qt, 6.2 Imp qt)
Approx. 7.6
8 (8.03 US qt, 6.69 Imp qt)
Approx. 7.7
8
(8.74 US 9t, 6.78 Imp 9t)
filler
CAUTION:
The SUBARU Genuine Coolant containing anti-
freeze and anti-rust agents is especially made
for SUBARU engine, which has an aluminum
crankcase. Always use SUBARU Genuine Cool-
ant, since other coolant may cause corrosion.
2) Fill engine coolant into reservoir tank up to the
upper level.
CO-25