Subaru IMPREZA 2002 Service Manual page 59

FUEL FILLER PIPE
FUEL
INJECTION
(FUEL
SYSTEMS)
8) Tighten the bolt which holds the fuel filler pipe
bracket on the body.
Tightening torque:
7.5 N-m (0.75 kgf-m, 5.4 ft-lb)
EN1 124
9) Tighten the bolts which hold the evaporation
hoses onto the clip of fuel filler pipe.
10) Install the fuel filler pipe protector
L
11) Install the rear right wheel.
EN0544
14) Connect the connector to the fuel pump relay.
15) Connect the battery ground terminal.
C: DISASSEMBLY
1) Move the clip, and disconnect the evaporation
hose from the joint pipe.
2) Remove the bolt which installs the joint pipe on
the fuel filler pipe.
12) Lower the vehicle.
13) Tighten the wheel nuts.
FU( SO H C)-57