Subaru IMPREZA 2002 Service Manual page 293

ACCELERATOR CONTROL CABLE
SPEED CONTROL SYSTEMS
3. Accelerator Control Cable
A: REMOVAL
1) Remove the accelerator pedal. <Ref. to SP-3,
REMOVAL, Accelerator Pedal.>
2) Separate the accelerator cable and accelerator
pedal.
B: INSTALLATION
1) Install in the reverse order of removal.
CAUTION:
If cable clamp is damaged, replace it with a
new one.
Never fail to cover the outer cable end with
boot.
Be careful not to kink the accelerator cable.
Do not apply grease to the throttle cable on
the engine side.
2) Adjust after pedal installation. <Ref. to SP-4, IN-
STALLATION, Accelerator Pedal.>
C: INSPECTION
1) Make sure the inner cable is not twisted or
frayed.
2) Make sure the outer cable is not cracked.
SP-7