FUEL PUMP
FUEL INJECTION (FUEL SYSTEMS)
22.Fuel Pump
A: REMOVAL
WARNING:
Place "NO FIRE" signs near the working area.
Be careful not to spill fuel on the floor.
NOTE:
Fuel pump assembly consists of fuel pump and fuel
level sensor.
1) Release the fuel pressure. <Ref. to FU(S0HC)-
TION, Fuel.>
2) Open the fuel filler flap lid and remove the fuel
filler cap.
3) Disconnect the battery ground cable.
50, RELEASING OF FUEL PRESSURE, OPERA-
4) Lift-up the vehicle.
5) Drain the fuel from the fuel tank. Set a container
under the vehicle and remove the drain plug from
the fuel tank.
6) Tighten the fuel drain plug.
Tightening torque:
26 N-m (2.65 kgf-m, 19.2 ff-lb)
7) Raise the rear seat and turn the floor mat up.
8) Remove the access hole lid.
EN0553
9) Disconnect the connector from the fuel pump.
10) Disconnect the quick connector and then dis-
connect the fuel delivery hose (A). <Ref. to FU(S0-
HC)-68, REMOVAL, Fuel Delivery, Return and
Evaporation Lines.>
FU( SOH C)-59