Subaru IMPREZA 2002 Service Manual page 201

-
FRONT EXHAUST PIPE
EXHAUST
6)
Tighten the bolts which install front and center
exhaust pipe assembly to rear exhaust pipe.
Tightening torque:
78 N.m (7.8 kgf-m, 73.0 ft-lb)
I
B2M3109
1
7 ) Tiahten the bolt which holds front and center ex-
haus pipe assembly to hanger bracket.
Tightening torque:
35 N-m (3.6 kgf-m, 26.0 ft-lb)
B2M3111
8) Lower the vehicle.
9) Connect the rear oxygen sensor connector.
10)
Connect the front oxygen (NF) sensor connec-
tor.
11) Connect the battery ground cable.
C: INSPECTION
1) Make sure there are no exhaust leaks from con-
nections and welds.
2) Make sure there are no holes or rusting.
EX( SOH C)-7