Subaru IMPREZA 2002 Service Manual page 21

I
INTAKE MANIFOLD
FUEL
INJECTION
(FUEL SYSTEMS)
10) Connect the engine coolant hose to the throttle
body.
(3) Tighten the bolts which install power steer-
ing pump bracket.
Tightening torque:
22 N.m (2.2 kgf-m, 15.9 ft-16)
11) Connect the PCV hose to the intake manifold.
(4) Install the power steering pipes onto the
right side intake manifold protector.
12) Connect the spark plug cords to the spark
13) Install the power steering pump.
(1) Install the power steering tank on the brack-
et.
plugs.
1
EN0361
(2) Connect the connector to the power steering
pump switch.
(5) Install the front side V-belt. <Ref. to ME(S0-
HC)-43, INSTALLATION, V-belt.>
(6) Install the resonator chamber.
33 N.m (3.4 kgf-m, 24.6 ft-16)
Tightening torque:
I
14) Connect the accelerator cable (A).
FU(S0HC)-19