Subaru IMPREZA 2002 Service Manual page 253

RADIATOR MAIN FAN AND FAN MOTOR
COOLING
1
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
When the main fan motor assembly cannot be in-
stalled as is, loosen the sub fan motor assembly
securing bolts to install it.
\ y g
EN0121
Tightening torque:
7.5 N-m (0.76 kgf-m, 5.5 I?-lb)
C: DISASSEMBLY
1) Remove the clip which holds motor connector
onto the shroud.
S7M119.17
2) Remove the nut which holds fan itself onto the
fan motor and shroud assembly.
EN01 20
3) Remove the bolts which install fan motor onto
the shroud.
D: ASSEMBLY
Assemble in the reverse order of disassembly.
Tightening torque:
4.4 N-m (0.45 kgf-m, 3.3 M b )
Tightening torque:
3.4 N.m (0.35 kgf-m, 2.5 ft-lb)
EN0120
CO-47