Engine Assembly - Subaru IMPREZA 2002 Service Manual

MECHANICAL
ENGINE ASSEMBLY
9. Engine Assembly
A: REMOVAL
1) Set the vehicle on lift arms.
2) Open the front hood fully and support with stay.
3) Release the fuel pressure. <Ref. to FU(S0HC)-
TION, Fuel.>
4) Remove the filler cap.
5) Disconnect the battery ground terminal.
50, RELEASING OF FUEL PRESSURE, OPERA-
6) Remove the air intake duct and air cleaner case.
<Ref. to IN(S0HC)-7, REMOVAL, Air Intake Duct.>
and <Ref. to IN(S0HC)-6, REMOVAL, Air Cleaner
Case.>
7) Remove the under cover.
8) Remove the radiator from vehicle. <Ref. to CO-
37, REMOVAL, Radiator.>
9) Remove ATF cooler pipe from cylinder head.
<Ref. to AT-47, REMOVAL, ATF Cooler Pipe and
Hose.>
10) Collect refrigerant, and remove the pressure
hoses. (With A/C)
(1) Place and connect the attachment hose to
the refrigerant recycle system.
(2) Collect the refrigerant from
A/C
system.
(3) Disconnect the A/C pressure hoses from
A/C compressor.
11) Remove the air cleaner case stay.
MTmodel
ATmodel
12) Disconnect the following connectors and ca-
bles.
(1) Front oxygen (NF) sensor connector
(2) Engine ground terminal
ME( SO HC)-33