Engine Control Module - Subaru IMPREZA 2002 Service Manual

ENGINE CONTROL MODULE
FUEL INJECTION (FUEL SYSTEMS)
16.Engine Control Module
A: REMOVAL
1) Disconnect the battery ground cable.
2) Remove the lower inner trim of passenger side.
<Ref. to El-46, REMOVAL, Lower Inner Trim.>
3) Detach the floor mat of front passenger seat.
4) Remove the protect cover.
I
EN118t
5) Remove the nuts (A) which hold ECM to the
bracket
.
6) Remove the clip (B) from the bracket.
186
7) Disconnect the ECM connectors and take out
the ECM.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
When replacing ECM, be careful not to use the
wrong spec. ECM to avoid any damage to the
fuel injection system.
Tightening torque:
50 Nom (0.51 kgf-m, 3.7 ff-lb)
FU(S0HC)-47