Subaru IMPREZA 2002 Service Manual page 176

MECHANICAL
CYLINDER BLOCK
~~
20) Apply fluid packing to matching surfaces and
23) Installation of oil pump:
-
install the oil separator-cover.
Fluid packing:
THREE BOND 1215
or
equivalent
I
S2M1834A
21) Install the flywheel or drive plate.
To lock the crankshaft, use ST.
ST 4984971 00 CRANKSHAFT STOPPER
Tightening torque:
72 N.m (7.3 kgf-m, 52.8 tl-lb)
22) Install the housing cover.
ST
(1) Discard the front oil seal after removal. Re-
place with a new one using ST.
499587100 OIL SEAL INSTALLER
S2M0235
(2) Apply fluid packing to the matching surface
of oil pump.
THREE BOND 1215
or
equivalent
Fluid packing:
S2M0739B
(A) O-ring
(3) Apply a coat of engine oil to the inside of the
oil seal.
1
S2M0118B
ME( S0HC)-78