Subaru IMPREZA 2002 Service Manual page 173

CYLINDER BLOCK
MECHANICAL
~~
11) Position the lower rail gap at (E) or (F) in the fig-
ure. Use new circlips.
CAUTION:
CAUTION:
Ensure ring gaps do not face the same direc-
tion.
Ensure ring gaps are not within the piston
skirt area.
12) Installing the circlip:
Install the circlips in piston holes located opposite
of serviceholes in cylinder block, when positioning
all pistons in the corresponding cylinders.
Q"
B2M1403A
#2
Front side
CAUTION:
Piston front mark faces towards the front of the
engine.
I
1
B2M3724A
Front mark
.
(1)
Piston
(2) Piston pin
(3) Circlip
(4) Gasket
(5) Service hole plug
Tightening torque: N.m (kgf-m, ft-lb)
T: 69 (7.0, 50.6)
M E(SOHC)-75