ACCELERATOR PEDAL
SPEED CONTROL SYSTEMS
2. Accelerator Pedal
6) Remove the clip inside engine compartment.
SOHCmodel
A: REMOVAL
1) Disconnect the ground terminal from battery.
2) Remove the lock nut from accelerator cable
bracket.
3) Separate the accelerator cable from bracket.
4) Remove the accelerator cable end from throttle
cam.
5 ) Disconnect the accelerator cable from throttle
body.
CAUTION:
Be careful not to kink the accelerator cable.
SOHCmodel
DOHC TURBO model
DOHC TURBO model
EN0919
(A) Locknut
(B)
Accelerator cable bracket
(C) Accelerator cable
(D)
Throttle cam
(A) Toe board
(B) Accelerator cable
(C) To accelerator pedal
(D) Brake booster
(E) Clip
7) Remove the instrument panel lower cover from
instrument panel, and connector.
8) Remove the brake and clutch pedal bracket. (MT
model) <Ref. to BR-51, REMOVAL, Brake Pedal.>
SP-3