Subaru IMPREZA 2002 Service Manual page 277

OIL PAN AND STRAINER
LUBRICATION
B: INSTALLATION
CAUTION:
Before installing the oil pan, clean sealant from
oil pan and engine block.
1) Install the baffle plate.
Tightening torque:
6.4 N.m (0.65 kgf-m, 4.7 ft-lb)
2) Install the oil strainer onto baffle plate.
Replace the O-ring with a new one.
Tightening torque:
CAUTION:
70 N.m (7.0 kgf-m, 7 ft-lb)
3) Apply fluid packing to mating surfaces and install
the oil pan.
Fluid packing:
THREE BOND 7215 or equivalent
4) Tighten bolts which install the oil pan onto en-
gine block.
Tightening torque:
Non-Turbo model
5 N-m (0.5 kgf-m, 3.6 ft-lb)
Turbo model
5) Lower the engine onto front crossmember.
6) Tighten the nuts which install front cushion rub-
ber onto front crossmember.
Tightening torque:
69 N.m (7.0 kgf-m, 51 tl-lb)
LU-19