Subaru IMPREZA 2002 Service Manual page 301

3
IGNITION COIL AND IGNITOR ASSEMBLY
IGNITION
3. Ignition Coil and Ignitor As-
A: REMOVAL
1) Disconnect the ground terminal from battery.
sembly
2) Disconnect the spark plug cords from ignition
coil and ignitor assembly.
S6M037:
3) Disconnect the connector from ignition coil and
ignitor assembly.
4) Remove the ignition coil and ignitor assembly.
B: INSTALLATION
1) Install in the reverse order of removal.
Tightening torque:
CAUTION:
Be sure to connect wires to their proper posi-
6.4 Nom (0.65 kgf-m, 4.7 ff-lb)
tions. Failure to do so will damage the unit.
IG(SOHC)-7