Subaru IMPREZA 2002 Service Manual page 71

FUEL DELIVERY, RETURN AND EVAPORATION LINES
FUEL
INJECTION (FUEL SYSTEMS)
8) Separate the quick connector on the fuel delivery
and return line.
(1) Clean the pipe and connector, if they are
covered with dust.
(2) Hold the connector (A) and push retainer (B)
down.
(3) Pull out the connector (A) from retainer (B).
CAUTION:
Replace retainer with new ones.
-
S2M0228L
(A) Connector
(B) Retainer
(C) Pipe
B: INSTALLATION
1) Connect the quick connector on fuel delivery
line.
CAUTION:
Always use a new retainer.
Make sure that the connected portion is
not
damaged or has dust. If necessary, clean seal
surface of pipe.
S2M0229A
(1) Set the new retainer (B) to connector (A).
(2) Push the pipe into the connector completely.
NOTE:
At this time, two clicking sounds are heard.
(C)
I
S2M0230P
(A) Connector
(B) Retainer
(C) Pipe
CAUTION:
Pull the connector to ensure it is
connected
securely.
Ensure the two retainer pawls are engaged in
their mating positions
in
the connector.
Be sure to inspect hoses and their connec-
tions
for any leakage of fuel.
I I
(A) Connector
(B) Retainer
(C) Pipe
FU(S0HC)-69