Fuel Level Sensor - Subaru IMPREZA 2002 Service Manual

FUEL LEVEL SENSOR
FUEL INJECTION (FUEL SYSTEMS)
23.Fuel Level Sensor
6: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
A: REMOVAL
WARNING:
Place "NO FIRE" signs near the working area.
4.4 N-m (0.45 kgf-m, 3.3 fi-lb)
Be careful not to spill fuel on the floor.
NOTE:
Fuel level sensor is built in fuel pump assembly.
1) Remove the fuel pump assembly. <Ref. to
FU(S0HC)-59, REMOVAL, Fuel Pump.>
2) Disconnect the connector from the fuel pump
bracket.
3) Remove the bolt which installs the fuel level sen-
sor on the mounting bracket.
EN113(
FU(S0HC)-62