Subaru IMPREZA 2002 Service Manual page 275

OIL PAN AND STRAINER
LUBRICATION
5. Oil Pan and Strainer
A: REMOVAL
1) Set the vehicle on lift arms.
2) Remove the front wheels.
3) Disconnect the battery ground cable.
4) Remove the air intake duct and air cleaner case.
(Non-Turbo model)
<Ref. to IN(S0HC)-7, REMOVAL, Air Intake Duct.>
and <Ref: to IN(S0HC)-6, REMOVAL, Air Cleaner
Case. >
5) Disconnect the connector from mass air flow
sensor. (Turbo model)
I
6) Remove the air intake boot and air cleaner upper
cover. (Turbo model)
7) Remove the intercooler (Turbo model) <Ref. to
IN(D0HC TURBO)-1 0, REMOVAL, Intercooler.>
8) Remove the pitching stopper.
9) Remove the radiator upper brackets.
Non-Turbo model
3 1
Turbo model
10) Support the engine with a lifting device and wire
ropes.
11) Lift-up the vehicle.
CAUTION:
At this time, raise up wire ropes.
LU-17