TIMING BELT ASSEMBLY
MECHANICAL
4) Install the belt idler (No. 2).
Tightening torque:
39
N-m
(4.0
kgf-m,
28.9
ft-lb)
\S2M1008I
5) After ensuring that the marks on the timing belt
and camshaft sprockets are aligned, remove the
stopper pin from belt tensioner adjuster.
6) Install the timing belt guide. (MT vehicles only)
(1) Temporarily tighten the remaining bolts
(2) Check and adjust the clearance between
timing belt and timing belt guide by using thick-
ness gauge.
1 . 0 - M .
5 mm
(0.039M.
020 in)
Clearance:
(3) Tighten the remaining bolts.
9.8
N-m (1.0 kgf-m,
7.2
ft-lb)
Tightening torque:
7) Install the belt cover. <Ref. to ME(S0HC)-46, IN-
STALLATION, Belt Cover.>
8) Install the crankshaft pulley. <Ref. to ME(S0-
HC)-45, REMOVAL, Crankshaft Pulley.>
9) Install the V-belt. <Ref. to ME(S0HC)-43, IN-
STALLATION, V-belt.>
ME(S0HC)-50