Subaru IMPREZA 2002 Service Manual page 256

RESERVOIR TANK
COOLING
11 .Reservoir Tank
A: REMOVAL
1) Disconnect the over flow hose from the radiator
filler neck position.
2) Remove the bolts which install reservoir tank
onto the radiator main fan shroud.
3) Remove the reservoir tank.
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
7.5 N.m (0.76 kgf-m, 5.5 ff-lb)
C: INSPECTION
Make sure the engine coolant level is between full
and low.
CO-50