Subaru IMPREZA 2002 Service Manual page 200

FRONT EXHAUST PIPE
EXHAUST
9) Remove the front and center exhaust pipe as-
sembly from the vehicle.
CAUTION:
Be careful not to let the front and center ex-
haust pipe assembly fall off when removing as
it is quite heavy.
After removing the front and center exhaust
assembly, do not apply excessive pulling force
on the rear exhaust pipe.
10) Separate the front exhaust pipe from center ex-
haust pipe.
B: INSTALLATION
1) Install the front exhaust pipe to center exhaust
pipe.
NOTE:
Replace the gaskets with new ones.
Tightening torque:
30 N.m (3.1 kgf-m, 22.4 ft-lb)
\ \ '
S2M0923
2) Install the front and center exhaust pipe assem-
bly to the vehicle.
3) Temporarily tighten the bolt which installs front
and center exhaust pipe assembly to hanger brack-
et.
I
B2M3111
4) Tighten the bolts which hold front exhaust pipe
onto cylinder heads.
Tightening torque:
30 N-m (3.1 kgf-m, 22.4 ft-lb)
5 ) Install the under cover.
EX(S0HC)-6