Intake Manifold - Subaru IMPREZA 2002 Service Manual

FUEL
INJECTION
(FUEL SYSTEMS)
INTAKE MANIFOLD
3. Intake Manifold
A: REMOVAL
1) Release the fuel pressure. <Ref. to FU(S0HC)-
TION, Fuel.>
2) Open the fuel flap lid, and remove the fuel filler
cap.
3) Disconnect the battery ground cable.
50, RELEASING OF FUEL PRESSURE, OPERA-
4) Remove the air intake duct and air cleaner as-
sembly. <Ref. to IN(S0HC)-7, REMOVAL, Air In-
take Duct.> and <Ref. to IN(S0HC)-6, REMOVAL,
Air Cleaner Case.>
5 ) Disconnect the accelerator cable (A).
6) Disconnect the cruise control cable (B). (With
cruise control model)
7) Remove the power steering pump.
(1) Remove the resonator chamber. <Ref. to
IN(S0HC)-8, REMOVAL, Resonator Cham-
ber.>
(2) Remove the front side V-belt. <Ref. to
ME(S0HC)-43, REMOVAL, V-belt.>
(3) Remove the bolts which hold power steering
pipes onto the intake manifold protector.
NOTE:
Do not disconnect the power steering hose.
(4) Remove the bolts which install power steer-
ing pump bracket
(5) Disconnect the connector from the power
steering pump switch.
(6) Remove the power steering tank from the
bracket by pulling it upwards.
/t/
EN0361
FU(S0HC)-15