Subaru IMPREZA 2002 Service Manual page 63

FUEL PUMP
FUEL INJECTION (FUEL SYSTEMS)
B: INSTALLATION
Install in the reverse order of removal. Do the fol-
lowing:
(1) Always use new gaskets.
(2) Ensure the sealing portion is free from fuel
or
foreign particles before installation.
(3) Tighten the nuts in alphabetical sequence
shown in figure to specified torque.
Tightening torque:
4.4 N-m (0.45 kgf-m, 3.3 fi-lb)
S2M0063A
C: INSPECTION
Connect the lead harness to the connector terminal
of fuel pump and apply the battery power supply to
check whether the pump operate.
WARNING:
Wipe off the fuel completely.
Keep battery as far apart from fuel pump as
possible.
Be sure to turn the battery supply ON and
OFF on the battery side.
Do not run fuel pump for a long time under
non-load condition.
FU(S0HC)-61