RADIATOR
COOLING
10) Connect the connectors to the radiator main fan
motor (A) and sub fan motor (B).
2. TURBO MODEL
1) Attach the radiator mounting cushions to holes
11 Install the under cover.
12) Lower the vehicle.
13) Connect the battery ground cable.
14) Fill coolant. <Ref. to CO-25, FILLING OF EN-
GINE COOLANT, REPLACEMENT, Engine Cool-
ant.>
15) Check ATF level. <Ref. to AT-9, INSPECTION,
Automatic Transmission Fluid.>
on the vehicle.
2) Install the radiator brackets and tighten bolts.
Tightening torque:
12 N.m (1.2 kgf-m, 8.7 ft-lb)
3) Connect the radiator inlet hose (A) and coolant
filler tank hose (B).
CO-42