Subaru IMPREZA 2002 Service Manual page 386

DIAGNOSTICS FOR ENGINE STARTING FAILURE
ENGINE (DIAGNOSTICS)
C: CONTROL MODULE POWER SUPPLY AND GROUND LINE
CAUTION:
After repair or replacement of faulty parts, conduct CLEAR MEMORY MODEcRef. to EN(SOHCk43,
Clear Memory Mode.> and INSPECTION MODE. <Ref. to EN(SOHC)BO, Inspection Mode.>
WIRING DIAGRAM:
MAIN RELAY
EN1
078
-
1
Step
CHECK MAIN RELAY.
1)Turn the ignition switch to OFF.
2)Remove the main relay.
3)Connect the battery to main relay terminals
No.
1
and No.
2.
4)Measure the resistance between main relay
terminals.
Terminals
NO.
3
-
NO. 5:
NO. 4
-
NO. 6:
Check
I
Is the resistance less than 10
relay.
EN(S0HC)-62