Subaru IMPREZA 2002 Service Manual page 281

OIL PRESSURE SWITCH
LU
B
R I CAT1 0 N
B: INSTALLATION
1) Apply fluid packing to oil pressure switch
threads.
Fluid packing:
THREE BOND 1215 or equivalent
2) Install the oil pressure switch onto engine block.
Tightening torque:
25 N.m (2.5 kgf-m, 78.1 ff-lb)
3) Connect the terminal of oil pressure switch.
4) Install the generator on bracket and temporarily
tighten installing bolts.
5) Install the front side V-belt and adjust it.
<Ref. to ME(S0HC)-43, INSTALLATION, V-belt.>
or <Ref. to ME(D0HC TURBO)-44, INSTALLA-
TION, V-belt.>
6) Install the V-belt cover.
Non-Turbo model
B2M31 OE
Turbomodel
' 1
- 1 1
EN0048
LU-23