MECHANICAL
ENGINE ASSEMBLY
14) Remove the power steering pump from brack-
et.
(1) Remove the resonator chamber.
(2) Loosen the lock bolt and slider bolt, and re-
move the front side V-belt.<Ref. to ME(S0HC)-
43, FRONT SIDE BELT, REMOVAL, V-belt.>
(3) Remove the pipe with bracket.
(4) Remove the bolts which install the power
steering pump bracket.
(5) Remove the power steering tank from the
bracket by pulling it upward.
(6) Place the power steering pump on the right
side wheel apron.
15) Remove the front and center exhaust pipe.
<Ref. to EX(S0HC)-5, REMOVAL, Front Exhaust
Pipe.>
16) Remove the nuts which hold lower side of
transmission to engine.
17) Remove the nuts which install the front cushion
rubber onto front crossmember.
ME(S0HC)-35