Subaru IMPREZA 2002 Service Manual page 171

CYLINDER BLOCK
MECHANICAL
B: INSTALLATION
(1) Crankshaft bearing
(2) Crankshaft
(31
Cvlinder block
(4) Rear oil seal
Tightening torque: N.m (kgf-m, ft-lb)
T1: 25 (2.5, 18.1)
T2: 47 (4.8, 34.7)
\ I
CAUTION:
Remove oil in the mating surface of bearing and
cylinder block before installation. Also apply a
coat of engine oil to crankshaft pins.
1) Position the crankshaft on the #2 and #4 cylinder
block.
2) Apply fluid packing to the mating surface of #1
and
#3
cylinder block, and position it on #2 and #4
cylinder block.
Fluid packing:
CAUTION:
Do not allow fluid packing to jut into O-ring
grooves, oil passages, bearing grooves, etc.
THREE BOND 7275 or equivalent
ME(SOHC)-73