Table of Contents
Advertisement
Commissioning
7.2 STARTER software
Danger to life as a result of incorrect commissioning
Malfunctions can occur as a result of incorrect commissioning or incorrect parameterization.
Premature failures and subsequent damage to the drive system can result in death, serious
injury or material damage. Incorrectly performed commissioning can result in the warranty
becoming null and void.
• Never commission the device if it is dirty or polluted. Immediately contact Customer Support
if it is polluted. You can find the relevant contact person under "Service & Support
(Page 141)".
• This device may only be commissioned by electrically skilled persons who have been
adequately trained on this product, and have experience with commissioning this product
and the associated plant and system components. The electrical technician commissioning
the equipment must be trained on the specific product as a result of the differences between
the individual products, e.g. regarding topology and closed-loop control.
• Obtain information about the range of SITRAIN training courses available through your local
contact person. Make use of the support and services offered by the responsible Siemens
Service Center when commissioning this equipment. You can find the relevant contact
person under "Service & Support (Page 141)".
7.2
STARTER software
STARTER software is used to commission the drive. You perform the following using STARTER:
• Commissioning
• Testing
• Drive optimization
• Diagnostics
The STARTER software is available in SIOS
view/26233208)
98
(https://support.industry.siemens.com/cs/ww/en/
Operating Instructions, 02/2022, A5E31872818
3rd Party LCI Control Upgrade
Advertisement
Table of Contents
