Table of Contents
Advertisement
2
Fully Supported
Commands
AR – Pre-Feed
This legacy command sets the feed length in successive mode.
AX – Position Fine Adjustment
This command configures the feed, cut/strip, and back feed distances.
AY – Print Density Fine Adjustment
This command adjusts the print density.
C – Image Buffer Clear
This command clears the image buffer.
D – Label Size Set
This command defines the pitch, effective print width, and effective print
length of a label in 1/10 mm units. Any label printed on continuous media will
move the pitch length of media.
D..E – Label Length Set
This legacy command defines the pitch and gap length of a label in 1/10 mm
units. It does not define the label width. Any label printed on continuous media
will move the pitch length of media.
IB – Eject
This command ejects the current label.
J1 – Flash Format
This command formats the sections in flash memory where the host data
(through XO, XP commands) or bitmap graphic characters (through XD
command) are stored.
13
Advertisement
Table of Contents
