Example For Binding A Tunnel To The Martini L2Vpn - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
l

1.9.2 Example for Binding a Tunnel to the Martini L2VPN

Networking Requirements
As shown in
are as follows:
l
l
Issue 01 (2011-07-15)
#
bgp 65420
peer 10.3.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
peer 10.3.1.2 enable
#
return
Configuration file of CE4
#
sysname CE4
#
vlan batch 40
#
interface Vlanif 40
ip address 10.4.1.1 255.255.255.252
#
interface GigabitEthernet1/0/2
port hybrid pvid vlan 40
port hybrid untagged vlan 40
#
bgp 65420
peer 10.1.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
peer 10.4.1.2 enable
#
return
Figure 1-3, Site 1, Site 2, and Site 3 belong to VPNA. The networking requirements
Configuring a Martini L2VPN
The communication between Site 1 and Site 2 is independent of that between Site 1 and
Site 3.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 VPN Tunnel Management Configuration
42