Example For Configuring A Remote Ccc Connection - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
l

5.11.2 Example for Configuring a Remote CCC Connection

Networking Requirements
The CE is connected to the PE through a GE interface.
To create a remote CCC connection between CE1 and CE2, you need to complete the following
tasks:
l
l
Figure 5-5 Networking diagram for configuring remote CCC connection
CE 1 to CE 2
Device
PE1
Issue 01 (2011-07-15)
#
return
Configuration file of CE2
#
sysname CE2
#
vlan batch 20
#
interface Vlanif 20
ip address 100.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 20
#
return
Create the remote CCC connection between the two PEs.
Configure two static LSPs on P to exchange packets.
O-Label
200
I-Label
100
Loopback1
1.1.1.9/32
PE1
GE 2/0/0
GE 1/0/0
GE 1/0/0
CE 1
Interface
GigabitEthernet1/0/0
GigabitEthernet2/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
I-Label O-Label
200 201
O-Label I-Label
100 101
Loopback1
2.2.2.9/32
P
GE 2/0/0 GE1/0/0
CCC remote
connection
VLANIF interface
VLANIF 10
VLANIF 20
5 VLL Configuration
I-Label
201
O-Label
CE 2 to CE 1
101
Loopback1
3.3.3.9/32
PE2
GE 1/0/0
GE 2/0/0
GE 1/0/0
CE 2
IP address
-
10.1.1.1/24
493