Huawei quidway s7700 Configuration Manual page 102
Smart routing switch
Hide thumbs
Also See for quidway s7700:
- Configuration manual - ethernet (648 pages) ,
- Configuration manual - multicast (551 pages) ,
- Configuration manual (375 pages)
Table of Contents
Advertisement
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
[CE1-Vlanif10] quit
[CE1] interface tunnel 2/0/0
[CE1-Tunnel2/0/0] isis enable 50
[CE1-Tunnel2/0/0] quit
# Configure PE1.
[PE1] isis 50 vpn-instance vpn1
[PE1-isis-50] network-entity 50.0000.0000.0002.00
[PE1-isis-50] quit
[PE1] interface tunnel 1/0/0
[PE1-Tunnel1/0/0] isis enable 50
[PE1-Tunnel1/0/0] quit
Step 7 Configure the IS-IS route between CE2 and PE2.
# Configure CE2.
[CE2] isis 50
[CE2-isis-50] network-entity 50.0000.0000.0004.00
[CE2-isis-50] quit
[CE2] interface vlanif 50
[CE2-Vlanif50] isis enable 50
[CE2-Vlanif50] quit
[CE2] interface vlanif 60
[CE2-Vlanif60] isis enable 50
[CE2-Vlanif60] quit
# Configure PE2.
[PE2] isis 50 vpn-instance vpn1
[PE2-isis-50] network-entity 50.0000.0000.0003.00
[PE2-isis-50] quit
[PE2] interface vlanif50
[PE2-Vlanif50] isis enable 50
[PE2-Vlanif50] quit
Step 8 Set up the MP-BGP peer relationship between PE1 and PE2.
# On PE1, specify PE2 as an IBGP peer, set up the IBGP connection by using the loopback
interface, and enable the capability of exchanging VPN IPv4 routing information between PE1
and PE2.
[PE1] bgp 100
[PE1-bgp] peer 3.3.3.9 as-number 100
[PE1-bgp] peer 3.3.3.9 connect-interface loopback 1
[PE1-bgp] ipv4-family vpnv4
[PE1-bgp-af-vpnv4] peer 3.3.3.9 enable
[PE1-bgp-af-vpnv4] quit
# Enter the view of the BGP VPN instance vpn1 and import the direct routes and IS-IS routes.
[PE1-bgp] ipv4-family vpn-instance vpn1
[PE1-bgp-vpn1] import-route direct
[PE1-bgp-vpn1] import-route isis 50
# On PE2, specify PE1 as an IBGP peer, set up the IBGP connection by using the loopback
interface, and enable the capability of exchanging VPN IPv4 routing information between PE2
and PE1.
[PE2] bgp 100
[PE2-bgp] peer 1.1.1.9 as-number 100
[PE2-bgp] peer 1.1.1.9 connect-interface loopback 1
[PE2-bgp] ipv4-family vpnv4
[PE2-bgp-af-vpnv4] peer 1.1.1.9 enable
[PE2-bgp-af-vpnv4] quit
# Enter the view of the BGP VPN instance vpn1 and import the direct routes and IS-IS routes.
Issue 01 (2011-07-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 GRE Configuration
87
Advertisement
Table of Contents
