Example For Configuring Vpn Gr - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN

3.17.15 Example for Configuring VPN GR

Networking Requirements
CE1 and CE2 are deployed on the same VPN. As backbone network devices, PE1, P device,
and PE2 are connected through IS-IS in the same AS. CE1 is connected to PE1, between which
BGP is run; CE2 is connected to PE2, between which OSPF is run, as shown in
Figure 3-17 Networking of VPN GR
VLANIF 10
10.1.1.2/30
Device
PE1
PE2
Issue 01 (2011-07-15)
interface GigabitEthernet1/0/0
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 40
port hybrid untagged vlan 40
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 50
port hybrid untagged vlan 50
#
bgp 65410
peer 10.1.1.2 as-number 100
peer 10.2.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
network 10.3.1.0 255.255.255.0
import-route direct
peer 10.1.1.2 enable
peer 10.2.1.2 enable
#
return
Loopback1
1.1.1.9/32
GE2/0/0
VLANIF 20
100.1.1.1/30
PE1
GE1/0/0
GE1/0/0
VLANIF 10
10.1.1.1/30
CE1
Interface
GigabitEthernet1/0/0
GigabitEthernet2/0/0
GigabitEthernet1/0/0
GigabitEthernet2/0/0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Loopback1
2.2.2.9/32
GE1/0/0
VLANIF 20 P
100.1.1.2/30
VLANIF Interface
VLANIF 10
VLANIF 20
VLANIF 30
VLANIF 40
3 BGP MPLS IP VPN Configuration
Loopback1
3.3.3.9/32
GE1/0/0
VLANIF 30
100.2.1.2/30
GE2/0/0
VLANIF 30
100.2.1.1/30
GE1/0/0
VLANIF 40
10.2.1.1/30
IP Address
10.1.1.2/24
100.1.1.1/24
100.2.1.2/24
10.2.1.2/24
Figure 3-17.
PE2
GE2/0/0
VLANIF 40
10.2.1.2/30
CE2
299