Checking The Configuration - Huawei quidway s7700 Configuration Manual

Smart routing switch
Hide thumbs Also See for quidway s7700:
Table of Contents

Advertisement

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
----End

7.4.4 Checking the Configuration

After VPLS in LDP mode is configured, you can view information about local VSIs, remote
VSIs, VPLS connections, outgoing interfaces of VSI PWs, and the tunnel policy referenced by
the VSIs.
Prerequisite
The configurations of the Martini VPLS function are complete.
Procedure
l
l
l
l
l
l
----End
Issue 01 (2011-07-15)
Before adding an interface into an Eth-Trunk, ensure the interface is not configured
with any Layer 3 attributes such as IP address and any services.
An Ethernet interface can join only one Eth-Trunk interface. To join another Eth-
Trunk interface, the Ethernet interface must quit from the original one.
Member interfaces of an Eth-Trunk interface must be of the same type. That is, FE
interfaces and GE interfaces cannot join an Eth-Trunk interface.
6.
Run:
quit
Return to the system view.
7.
Run:
interface eth-trunk trunk-id
The Eth-Trunk interface view is displayed.
8.
(Optional) Run:
undo portswitch
The Layer 2 interface is configured as a Layer 3 interface.
9.
Run:
l2 binding vsi vsi-name
The Eth-Trunk interface is bound with the VSI.
Run the display vsi [ name vsi-name ] [ verbose ] command to check the information about
the VPLS VSI.
Run the display vsi remote ldp [ router-id ip-address ] [ pw-id pw-id ] command to check
information about the remote VSI.
Run the display vpls connection [ bgp | vsi vsi-name ] [ down | up ] [ verbose ] command
to check information about the VPLS connection.
Run the display vsi pw out-interface [ vsi vsi-name ] command to check information about
the outgoing interface of the VSI PW.
Run the display l2vpn vsi-list tunnel-policy policy-name command to check information
about the tunnel policy used by the VSI.
Run the ping vpn-config peer-address peer-address vsi-name vsi-name [ pw-id pw-id ]
[ local ] [ remote ] command to view configurations of the VSI on the peer PE.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 VPLS Configuration
695

Advertisement

Table of Contents
loading

Table of Contents