Establishing The Configuration Task; Creating Vsis And Configuring Bgp Signaling - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN

7.9.1 Establishing the Configuration Task

Before configuring dual-homed Kompella VPLS, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the required data. This can help
you complete the configuration task quickly and accurately.
Applicable Environment
To improve the reliability of VPLS and prevent the fault on a PE, you can adopt the networking
where a CE accesses two PEs.
Pre-configuration Tasks
Before configuring dual-homed Kompella VPLS, complete the following tasks:
l
l
l
l
Data Preparation
To configure dual-homed Kompella VPLS, you need the following data.
No.
1
2
3
4
5

7.9.2 Creating VSIs and Configuring BGP Signaling

When configuring Kompella VPLS, you need to create and configure VSIs (set RDs and VPN
targets of the VSIs), configure BGP, and create site connections.
Context
Configure two VSIs with the same attributes on two dual-homed PEs.
Do as follows on the PEs:
Procedure
Step 1 Run:
system-view
Issue 01 (2011-07-15)
Configuring LSR IDs and enabling MPLS on PEs and Ps
Enabling MPLS L2VPN on PEs
Establishing the tunnels between PEs to transmit user data
Establishing BGP VPLS peer relationship between PEs
Data
BGP peers used to exchange VPLS information
Name of the VSI
RDs and VPN Targets of the VSI
CE ID of the site, maximum number of permitted CEs that access the VPLS network,
and default CE offset
Interface bound to the VSI
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 VPLS Configuration
713