Huawei quidway s7700 Configuration Manual page 170

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
l
Issue 01 (2011-07-15)
Configure RSVP GR.
1. Run:
system-view
The system view is displayed.
2. Run:
mpls
The MPLS view is displayed.
3. Run:
mpls te
MPLS TE is enabled.
4. Run:
mpls rsvp-te
RSVP TE is enabled.
5. Run:
mpls rsvp-te hello
The RSVP Hello extension of the local node is enabled.
6. Run:
mpls rsvp-te hello full-gr
The GR capability of RSVP TE is enabled. In addition, the GR capability of the peer
is also supported.
By default, the GR capability of RSVP TE is disabled.
7. (Optional) Run:
mpls rsvp-te hello nodeid-session ip-address
The Hello session is established between nodes of RSVP TE enabled with GR
capability.
8. Run:
quit
Return to the system view.
9. Run:
interface interface-type interface-number
The RSVP interface view is displayed.
10. Run:
mpls
The MPLS view is displayed.
11. Run:
mpls te
MPLS TE is enabled.
12. Run:
mpls rsvp-te
RSVP TE is enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 BGP MPLS IP VPN Configuration
155