Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
No.
1
2
3
4
5.4.2 Enabling MPLS L2VPN
Before configuring an SVC VLL, you must enable MPLS L2VPN.
Context
Do as follows on the PEs of the two ends of the VC:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mpls l2vpn
The MPLS L2VPN is enabled.
----End
5.4.3 Creating an SVC VLL Connection
Context
Do as follows on the PEs on the two ends of the VC.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The AC interface view is displayed.
Step 3 (Optional) Run:
undo portswitch
The Layer 2 interface is configured as a Layer 3 interface.
Issue 01 (2011-07-15)
Data
Type and number of the interface accessing CE
Destination LSR ID of SVC
In-label and out-label values of L2VPN connection
Tunnel policy of the SVC
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 VLL Configuration
459