Huawei quidway s7700 Configuration Manual page 607

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
local status code
remote AC OAM state
remote PSN state
remote forwarding state: forwarding
remote status code
BFD for PW
manual fault
active state
forwarding entry
link state
local VC MTU
local VCCV
remote VCCV
local control word
tunnel policy
traffic behavior
PW template name
primary or secondary
VC tunnel/token info
create time
up time
last change time
VC last up time
VC total up time
CKey
NKey
PW redundancy mode
AdminPw interface
AdminPw link state
CE1 and CE2 can ping each other.
Take the display on CE1 for example.
<CE1> ping 100.1.1.2
PING 100.1.1.2: 56
--- 100.1.1.2 ping statistics ---
----End
Configuration Files
l
l
Issue 01 (2011-07-15)
NO.0 TNL type : lsp
data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=31 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=5 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=2 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=28 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/15/31 ms
Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 100.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
Configuration file of PE1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
: 0x0
: up
: up
: 0x0
: unavailable
: not set
: active
: exist
: up
: 1500 remote VC MTU
: alert lsp-ping bfd
: alert lsp-ping bfd
: disable remote control word
: --
: --
: --
: primary
: 1 tunnels/tokens
, TNL ID : 0x4800200f
: 0 days, 0 hours, 7 minutes, 16 seconds
: 0 days, 0 hours, 5 minutes, 6 seconds
: 0 days, 0 hours, 5 minutes, 6 seconds
: 2010/01/14 19:10:07
: 0 days, 3 hours, 28 minutes, 39 seconds
: 8
: 7
: --
: --
: --
6 PWE3 Configuration
: 1500
: disable
592