Checking The Configuration - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vsi vsi-name
The VSI view is displayed.
Step 3 Run:
broadcast-suppression cir cir-value cbs cbs-value
The broadcast traffic is suppressed based on VSIs.
Step 4 Run:
multicast-suppression cir cir-value cbs cbs-value
The multicast traffic is suppressed based on VSIs.
Step 5 Run:
unknown-unicast-suppression cir cir-value cbs cbs-value
The unknown unicast traffic is suppressed based on VSIs.
----End

7.11.3 Checking the Configuration

Context
The configurations of VPLS traffic suppression are complete.
Procedure
l
----End
Example
Run the display this command in the VSI view to check whether VPLS traffic suppression is
enabled.
[Quidway] vsi v1
[Quidway-v1] display this
#
vsi v1 static
pwsignal ldp
vsi-id 10
peer 9.9.9.9
broadcast-suppression cir 1000 cbs 11000
#
Issue 01 (2011-07-15)
Run the display this command in the VSI view to check whether VPLS traffic suppression
is enabled.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 VPLS Configuration
723