Configuring Manual Vpn Frr - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
Data Preparation
To configure the VPN FRR, you need the following data.
No.
1
2
3

3.12.2 Configuring Manual VPN FRR

After a backup next hop (a PE) is specified according to the routing policy, the VPN traffic can
be forwarded to the backup next hop if traffic forwarding between PEs fails.
Context
Do as follows on the switch.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
route-policy route-policy-name { permit | deny } node node
The routing policy node is created and the routing policy view is displayed.
Step 3 Run:
apply backup-nexthop { ip-address | auto }
The backup next hop is configured.
Step 4 Run:
quit
Return to the system view.
Step 5 Run:
ip vpn-instance vpn-instance-name
The VPN instance view is displayed.
Step 6 Run:
vpn frr route-policy route-policy-name
The VPN FRR is enabled.
----End
Issue 01 (2011-07-15)
Data
(Optional) Name of the routing policy
Name of the VPN instance
(Optional) Backup next hop
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 BGP MPLS IP VPN Configuration
149