Huawei quidway s7700 Configuration Manual page 765

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
No
SessionID
IngressLsrID
LocalLspID
Tunnel-Interface
Fec
Nexthop
In-Label
Out-Label
In-Interface
Out-Interface
LspIndex
Token
LsrType
Mpls-Mtu
TimeStamp
Bfd-State
Run the display vsi pw out-interface vsi a2 command on PE1, and you can view that the
outbound interface of the MPLS TE tunnel between 1.1.1.9 and 3.3.3.9 is Tunnel 1/0/0, but the
actual outbound interface is VLANIF20.
<PE1> display vsi pw out-interface vsi a2
Total: 1
--------------------------------------------------------------------------------
Vsi Name
--------------------------------------------------------------------------------
a2
CE1 and CE2 can ping each other.
<CE1> ping 10.1.1.2
PING 10.1.1.2: 56
--- 10.1.1.2 ping statistics ---
After CE1 pings CE2, run the display interface tunnel 1/0/0 command on the PE to view tunnel
interface information, and you can view that the number of packets passing through the interface
increases. For example, information about PE1 is displayed as follows:
<PE1> display interface tunnel 1/0/0
Tunnel1/0/0 current state : UP
Line protocol current state : UP
Last line protocol up time : 2009-03-22 12:03:48
Description:HUAWEI, Quidway Series, Tunnel1/0/0 Interface
Route Port,The Maximum Transmit Unit is 1500
Internet Address is unnumbered, using address of LoopBack0(1.1.1.9/32)
Encapsulation is TUNNEL, loopback not set
Tunnel destination 3.3.3.9
Tunnel up/down statistics 1
Tunnel protocol/transport MPLS/MPLS, ILM is available,
primary tunnel id is 0xe008948, secondary tunnel id is 0x0
QoS max-bandwidth : 64 Kbps
Output queue : (Urgent queue : Size/Length/Discards)
Output queue : (Protocol queue : Size/Length/Discards) 0/1000/0
Output queue : (FIFO queue : Size/Length/Discards)
Issue 01 (2011-07-15)
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
:
data bytes, press CTRL_C to break
Reply from 10.1.1.2: bytes=56 Sequence=1 ttl=255 time=125 ms
Reply from 10.1.1.2: bytes=56 Sequence=2 ttl=255 time=125 ms
Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=255 time=94 ms
Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=255 time=125 ms
Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=255 time=125 ms
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 94/118/125 ms
300 seconds output rate 0 bits/sec, 0 packets/sec
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1
100
1.1.1.1
1
Tunnel1/0/0
3.3.3.9/32
100.1.1.2
NULL
9217
----------
Vlanif20
2048
0x10080
Ingress
1500
2040sec
---
peer vcid
3.3.3.9 100
7 VPLS Configuration
interface
Tunnel1/0/0
Vlanif20
0/50/0
0/256/0
750