Configuring The Binding Relations For The Mvsi - Huawei quidway s7700 Configuration Manual

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
peer peer-address [ negotiation-vc-id vc-id ] [ tnl-policy policy-name ] upe
The VSI peer relation is configured between the UPE and the NPE. The MPLS LSR ID of the
NPE is configured as the peer address.
Step 6 Run:
quit
Return to the VSI view.
Step 7 Run:
admin-vsi
The VSI is configured as the mVSI.
----End

8.3.3 Configuring the Binding Relations for the mVSI

Context
Do as follows on the UPE.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vsi vsi-name
The view of the created VSI is displayed.
Step 3 Run:
track admin-vsi vsi-name
The service VSI is bound to an mVSI.
The mVSI can be bound to the service VSI. When receiving a gratuitous ARP packet or BFD
Down packets, the mVSI requests all the bound service VSIs to clear the MAC address entries
and to learn the MAC addresses again.
----End
Issue 01 (2011-07-15)
NOTE
The control plane requests the forwarding plane to clear the MAC addresses of the service VSIs if the
number of service VSIs bound to the mVSI reaches the threshold. The threshold is determined by the PAF
file and the license file.
l If the number of service VSIs bound to the mVSI does not reach the threshold, the control plane delivers
notification messages one by one to the forwarding plane to clear the MAC addresses of the service
VSIs bound to the mVSI and records the events in the logs.
l If the number of service VSIs bound to the mVSI reaches the threshold, the control plane delivers
notification messages to the forwarding plane to clear the MAC addresses of all the service VSIs and
records the log.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 VPLS Convergence Configuration
806