Huawei quidway s7700 Configuration Manual page 734

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
mac-address aging-time aging-time
The aging time of MAC address entries for the VPLS is configured.
Step 3 Run:
mac-address static mac-address interface-type interface-number
number
Static MAC address entries are configured.
Step 4 Run:
mac-address blackhole mac-address vsi vsi-name
MAC address blackhole entries are configured.
Step 5 Run:
vsi vsi-name
The VSI view is displayed.
Step 6 Run:
pwsignal ldp
The PW signaling protocol is specified as LDP and the VSI-LDP view is displayed.
Step 7 Run:
vsi-id vsi-id
The VSI ID is configured.
Step 8 Run:
quit
Return to the VSI view.
Step 9 Run:
mac-learning { enable | disable }
The MAC address learning is enabled or disabled.
Step 10 Run:
mac-learn-style unqualify
The unqualify MAC address learning mode is configured.
Step 11 Run:
mac-limit { action { discard | forward } | alarm { disable | enable } | maximum max-
num } *
The MAC address learning limit is configured.
----End
Issue 01 (2011-07-15)
vsi vsi-name
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 VPLS Configuration
vlanif interface-
719