Huawei quidway s7700 Configuration Manual page 358

Quidway S7700 Smart Routing Switch
Configuration Guide - VPN
Procedure
l
l
Issue 01 (2011-07-15)
Configuring Hub-PE
1. Run
system-view
The system view is displayed.
2. Run
ipv6 vpn6-instance vpn6-instance-name1
The IPv6 VPN instance view of VPN-spoke is displayed.
3. Run
vpn-target vpn-target1 &<1-8> import-extcommunity
The VPN target extended community for the IPv6 VPN instance is created. The VPN-
IPv6 routes advertised by all the Spoke-PEs are imported.
vpn-target1 lists the export community attribute of vpn-target advertised by all the
Spoke-PEs.
4. (Optional) Run
import route-policy policy-name
The import routing policy of the IPv6 VPN instance is configured.
5. (Optional) Run
export route-policy policy-name
The export routing policy of the IPv6 VPN Instance is configured.
6. Run
quit
Return to the system view.
7. Run
ipv6 vpn6-instance vpn6-instance-name2
The IPv6 VPN instance view of the VPN-hub is displayed.
8. Run
vpn-target vpn-target2 &<1-8> export-extcommunity
The VPN target extended community is configured to advertise the routes of all the
Hub stations and Spoke stations.
vpn-target2 is a list that contains all the import VPN targets of all the Spoke-PEs.
9. (Optional) Run
import route-policy policy-name
The import routing policy of the IPv6 VPN instance is configured.
10. (Optional) Run
export route-policy policy-name
The export routing policy of the IPv6 VPN instance is configured.
Configuring Spoke-PE
1. Run
system-view
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 BGP MPLS IPv6 VPN Configuration
343